If you're looking for a safe way to store your knives without just tossing them in a kitchen drawer together, this simple DIY project will do the trick without a ton of effort. All you'll need are some wood scraps, some wood glue, and a few screws.
This project comes from The Family Handyman, part of a series of home improvement projects that are less than $50, and can be completely done in an hour or two if you have access to the right tools. In this case, the only special tool you'll need is a table saw. He explains:
You can size this knife rack to suit any cabinet door and any number of knives. To build it, you just need a table saw and wood scraps. Run the scraps across the saw on edge to cut kerfs. Adjust the blade height to suit the width of the knife blades. You have to remove the saw's blade guard for these cuts, so be extra careful. Also cut a thin strip to act as an end cap. Glue and clamp the kerfed scraps together and sand the knife rack until the joints are flush. To mount it, use two 1-1/4-in. screws and finish washers.
The photo tells the story. As long as you're using light wood and don't add too many knives (not that you'd be able to, really) the hinges of the cabinet door will hold up with no problem. Worst case, tighten them down a bit before you mount your new knife block. You might not want to tackle this project if you're renting, but if you're like me and have more knives than you can fit on your magnetic strip (and you're woefully short on cabinet space), this is a quick home improvement project that adds useful storage and doesn't look terrible in the process. Hit the link below for some other quick and affordable DIY projects.
Organization Tips for Your Kitchen | The Family Handyman
hoya casa de mi padre corned beef and cabbage diners drive ins and dives jeff who lives at home 49ers news saint louis university
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.